CHC Navigation
CHCNAV i93
All-constellation IMU-RTK GNSS rover with tilt compensation.
Channels1,000+RTK (H)~0.8 cmIMUTilt comp.
View details Quote only
Channels1,892
No-GNSS±5 cm to 20 m
LiDAR96-line
CHC Navigation
CHCNAV ViLi i100
The rover that keeps surveying after the satellites are gone.
- 1,892 channels, RTK 8 mm + 1 ppm
- SFix ±3 cm with GNSS, ±5 cm without, to 20 m
- 96-line LiDAR, 860,544 points per second
- Post-processing-free LAS output
- Real-time cut and fill volumes on site
- 8 MP telephoto + 2 MP down camera, IP67
Authorized CHC Navigation dealer, Canada & the US
Pricing upon request - Itemized quote, so you can see and remove any line
- Volume pricing on multi-unit orders
- Financing available, ask about monthly options
- Genuine equipment, full manufacturer warranty
- Ships and supported across Canada & the US
- Full spec sheet (PDF) and a demo on request
Overview
What the CHCNAV ViLi i100 is for
The ViLi i100 is the only rover in the CHCNAV line that addresses the problem every surveyor knows: what happens under a canopy, beside a building, or in an urban corridor when the sky disappears. Its SFix 2.0 engine fuses a 96-line LiDAR and an 8 MP camera with 1,892 GNSS channels, holding ±3 cm with satellites and ±5 cm without them anywhere inside a 20 metre radius. It also writes post-processing-free LAS point clouds straight from the pole, and computes cut and fill volumes on site.
Choosing
Is the CHCNAV ViLi i100 right for your job?
Good candidate when
Urban canyon, dense canopy, and anywhere a conventional rover loses fix. It also writes LAS directly, which removes a processing step from the workflow.
Consider another route when
Open-sky work. If your sites have clear sky, a standard rover does the same job for less. Long GNSS-denied routes also sit outside the published 20 m SFix envelope.
Against the alternativesAgainst the i93 and i89: this is the one that keeps surveying when they stop, to plus or minus 5 cm across a 20 m GNSS-denied segment. Past that distance the error grows, so it is a boundary, not a blank cheque. That is the entire buying case.
CHCNAV ViLi i100 specifications
| Channels | 1,892 |
|---|---|
| RTK accuracy | 8 mm + 1 ppm horizontal, 15 mm + 1 ppm vertical |
| Static accuracy | 2.5 mm + 0.5 ppm |
| PPK accuracy | 2.5 mm + 0.1 ppm |
| SFix accuracy | ±3 cm (2σ) with GNSS; ±5 cm (2σ) without GNSS inside a 20 m radius |
| IMU | 200 Hz, calibration-free, 0° to 60° tilt |
| Cameras | 8 MP telephoto + 2 MP down, 130° H × 46° V, clear at 15 m / 5 cm |
| LiDAR | 96-line, 860,544 points/second, 77.5° H × 48.8° V, Class 1 |
| LiDAR range | 30 m at 10% reflectivity, 70 m at 80%; ±5 cm at 15 m |
| Point cloud output | LAS, no post-processing required |
| UHF radio | 410–470 MHz, receive only |
| Communications | Bluetooth 5.0, Wi-Fi 802.11ac |
| Storage | 64 GB internal, expandable to 1 TB |
| Dimensions | 208 × 162 × 95.5 mm |
| Weight | 1.39 kg |
| Environmental | IP67, IK08, −20 °C to +55 °C |
| Battery | 9,900 mAh; 22 h rover, approx. 5 h in LiDAR / SFix mode |
| Software | LandStar field software, TC100 tablet |
Specifications are for reference and may vary by configuration and region. We confirm exact specs on your quote.
Source: CHC Navigation official CHCNAV ViLi i100 page · manufacturer datasheet (PDF)
In the box
What's included
Typical configuration; exact contents are confirmed on your quote.
- ViLi i100 receiver
- Battery
- Charger
- Carbon-fibre pole (per config)
- TC100 controller (per config)
- Carrying case
- LandStar licence (per configuration)
FAQ
Buying the CHCNAV ViLi i100
Why don't you show a price for the CHCNAV ViLi i100?
Pricing for the CHCNAV ViLi i100 is sent by quote. The final price depends on the accessories, software, and support you include with the unit. Ask and we send an itemized quote, usually within one business day.
Is this genuine, warrantied equipment?
Yes. As an authorized CHC Navigation dealer, we supply genuine, brand-new equipment with full manufacturer warranty across Canada and the US.
Do you supply the CHCNAV ViLi i100 in Canada?
Yes. We supply and support the CHCNAV ViLi i100 across every Canadian province, quoted in CAD. Lead time depends on configuration and stock, and we confirm availability and timing on your quote.
Do you supply the CHCNAV ViLi i100 in the United States?
Yes. We supply and support the CHCNAV ViLi i100 across the United States, quoted in USD. Lead time depends on configuration and stock, and we confirm availability and timing on your quote.
Can I get a demo, financing, or the full spec sheet?
Yes. Financing is available on request, and we can arrange a demo and send the full spec sheet (PDF). Ask when you request pricing and we'll include it.
Related
More GNSS / RTK equipment
CHC Navigation
CHCNAV i89
Pocket-sized visual IMU-RTK receiver: 750 g, IP68, 16.5 h, configurable as base or rover.
Weight750 gRTK (H)8 mm + 1 ppmRatingIP68
View details Quote only
Request Pricing
Get a quote on the CHCNAV ViLi i100.
Tell us your workflow and region and a ScanSupply specialist gets back to you, typically within one business day, with pricing, configuration options, and availability.
- Itemized pricing & configuration help
- Canada & US shipping, tax & support handled
- Spec sheets, demos, and financing on request
Who you are dealing with
The people specifying your configuration have run this equipment on real sites, not just sold it. That is why a quote comes back with a recommendation and a reason, rather than a line item.
- Authorized CHC Navigation dealer for Canada and the United States.
- North American stock, so availability is a real answer and not a transatlantic guess.
- Every specification sourced. Where a figure is a manufacturer claim under their own test conditions, we say so.